DTF vs DTG: Which Print Method Fits Your Shirts

Short answerDTF and DTG both print full color on shirts. DTG prints ink straight onto the fabric and suits cotton best. DTF prints onto film first, then a heat press moves it onto the garment, so it works on more fabrics. If you sell small runs or use more than cotton, DTF is usually the easier fit.

What is the difference between DTF and DTG?

DTG means direct to garment. The printer puts ink right onto the shirt. DTF means direct to film. The design is printed onto PET film, coated with hot melt adhesive powder, cured, and then pressed onto fabric with a heat press.

That one step changes a lot. With DTG, the garment goes into the printer. With DTF, the transfer is made first and you can press it on later, on whatever blank you like.

Which fabrics suit each method?

This is where the two split most. Epson, a printer maker that sells both kinds of machines, says DTG suits cotton and cotton and polyester blends, and that DTF works on a wider variety of textiles (source below).

Brother, another printer maker, says white ink DTG works best at 80 percent cotton or more, and that problems can show up above 15 percent polyester. Epson also says DTG needs pretreatment for white ink or for polyester.

Our DTF transfers work on cotton, polyester, cotton and polyester blends, nylon, leather and denim. Waterproof or silicone coated materials do not bond well. If your product line mixes fabrics, one DTF transfer style covers more of it.

DTF DTG
How the ink gets on Printed on film, then pressed onto the garment Printed straight onto the garment
Fabrics Cotton, polyester, blends, nylon, leather, denim (our DTF page) Cotton and cotton blends work best (Epson, Brother)
Pretreatment of the garment Not needed, per Epson Needed for white ink or polyester, per Epson
Feel Sits on top of the fabric Called soft to the touch by Epson
Heat press needed Yes Not for the print itself

Which one feels softer?

Epson calls DTG soft to the touch. If the softest possible hand feel on a plain cotton tee is your top goal, DTG deserves a look.

Try DTF with a gang sheet. Fit many designs on one 22 inch wide sheet, from 1 foot to 20 feet, at $6.00 per foot.

Build a gang sheet

What does a small run cost with DTF?

With DTF there is no minimum and no setup fee. Our gang sheets are 22 inches wide and sold by length at $6.00 per foot. A 1 foot sheet is $6, a 5 foot sheet is $30, and a 10 foot sheet is $60. You put as many designs as fit on the sheet, so you pay for sheet length, not per shirt.

We do not print DTG, so we cannot quote you a DTG price. If you compare, ask the DTG shop about any per shirt price and any pretreatment or setup charge, then compare it to your cost per design on a sheet.

When should you pick DTF?

  • You sell on more than cotton, such as polyester, nylon or denim.
  • You want to print many designs at once on one sheet.
  • You want to stock transfers and press shirts when orders come in.
  • You already own a heat press.

When should you pick DTG?

  • You print mostly on cotton tees and want the print to go into the fabric.
  • You want a finished shirt handed to you, with no pressing on your end.

For a look at DTF against another common method, read DTF transfers vs screen printing. For a gang sheet that mixes many designs, see gang sheets vs individual DTF transfers.

Where do we ship from?

FiftyOne Designs is in Cumming, Georgia. Most DTF and gang sheet orders ship in 1 to 2 business days by USPS or UPS, and you get tracking by email. Local pickup in Cumming is free at checkout. Every file is reviewed before printing, and we reach out if something looks off. If we made the error, we reprint the order at no cost. Learn more on our DTF transfers page.

What should you ask before you choose?

  • What fabrics will I print on most? If cotton only, DTG is in play. If it is mixed, DTF is easier.
  • How many shirts per design? DTF has no minimum with us.
  • Do I own a heat press? DTF needs one.
  • How soft does the print need to feel? Epson calls DTG soft to the touch.

Answer those four and the choice is usually clear.

How do you order DTF transfers from us?

Open the gang sheet builder, upload your art, and place your designs on a sheet that is 22 inches wide. Pick the length you need, from 1 foot to 20 feet. Here is the price for each length at $6.00 per foot.

Sheet length Price
1 foot $6
2 feet $12
3 feet $18
5 feet $30
10 feet $60
15 feet $90
20 feet $120

Quantity 2 of the 20 foot sheet gives you 40 feet. The builder shows the print DPI when you upload, so you can keep it at 300 DPI or more. We review every file before printing.

Common questions

Is DTF better than DTG?

Neither wins every time. DTF works on more fabrics, per Epson, and has no minimum with us. DTG is aimed at cotton and can feel soft to the touch.

Can DTG print on polyester?

It can, but Epson says polyester needs pretreatment, and Brother says problems can show above 15 percent polyester with white ink. DTF is listed for polyester on our DTF page.

Do I need a heat press for DTF?

Yes. DTF transfers are pressed onto the garment with a heat press. Our guide pages cover what to know before you buy transfers.

Do you do DTG printing?

No. We print DTF transfers and gang sheets.

Sources: Epson, DTG and DTF printers for small businesses, Brother, printing on polyester

Back to blog
Build a gang sheet, DTF transfers printed on a roll, FiftyOne Designs

Build Your DTF Gang Sheet

22 inches wide, priced by the foot. No minimum. Most orders ship in 1 to 2 business days, or pick up in Cumming, GA.

$6.00 per foot

Build a Gang SheetAbout our DTF transfers

Related guides

DTF Transfers Gang Sheets Custom Hats Hat Patches Laser Engraving Custom Stickers
All Guides Get a Quote