What Fabrics Work With DTF Transfers (Polyester Included)
Short answerYes, DTF works on polyester. Our DTF transfers work on cotton, polyester, cotton and polyester blends, nylon, leather and denim. The one exception is waterproof or silicone coated material, which does not bond well.
Which fabrics work with DTF transfers?
- Cotton
- Polyester
- Cotton and polyester blends
- Nylon
- Leather
- Denim
That covers most tees, hoodies, jackets, bags and caps. Because the design is printed on film first, the transfer does not depend on the garment taking ink, as it does with some other methods.
Does DTF work on polyester?
Yes, polyester is on our DTF fabric list. This is a big reason people switch. Epson says DTG needs pretreatment for polyester and that DTF works on a wider variety of textiles (source below). Brother says problems can show with white ink DTG above 15 percent polyester. Sawgrass calls polyester the fabric sublimation loves, so polyester has choices, and DTF is one of them.
See our guide on DTF vs sublimation for polyester shirts, and DTF vs DTG for cotton and blends.
| Fabric | Works with DTF? | Note |
|---|---|---|
| Cotton | Yes | On our fabric list |
| Polyester | Yes | On our fabric list |
| Cotton and polyester blends | Yes | On our fabric list |
| Nylon | Yes | On our fabric list |
| Leather | Yes | On our fabric list |
| Denim | Yes | On our fabric list |
| Waterproof or silicone coated material | Does not bond well | The one exception |
What is the one exception?
Waterproof or silicone coated materials do not bond well with DTF. Check the garment tag or ask the maker before you order for a whole run.
Order a short sheet first. A 1 foot gang sheet is $6, a low cost way to test a new fabric.
Build a gang sheetHow do you test a fabric you are not sure about?
- Check the label. Is it one of the fabrics above?
- Look for a waterproof or silicone coating. If there is one, expect poor bonding.
- Order a short gang sheet with the design you plan to use.
- Press it on a spare piece of the same fabric before you press the real order.
- Wash that test piece the way a customer would, using our care steps below.
We do not give press settings on this page. Use the settings that come with your heat press or your supplier, and test first.
How should you wash DTF on polyester and other fabrics?
Wash inside out in cold water and tumble dry on low. Avoid bleach and high heat drying. Do not iron directly over the print. Our DTF page lists these steps for every fabric.
Who is this guide for?
It is for anyone pressing on mixed garments: print shops, small brands, team stores and crafters with a heat press. A short sheet from us, a spare garment and a test wash tell you more than any chart.
What file should you send?
PNG at 300 DPI with a transparent background is ideal. We also accept JPG, SVG, AI, EPS, PSD and PDF. Vector art is preferred where possible. The gang sheet builder shows the print DPI when you upload, so keep it at 300 DPI or more.
Where do we ship from?
FiftyOne Designs is in Cumming, Georgia. Most DTF and gang sheet orders ship in 1 to 2 business days by USPS or UPS, with tracking by email. Local pickup in Cumming is free at checkout. We review every file before printing and reach out if something looks off. Read more on the DTF transfers page.
Why does fabric matter for DTF?
DTF uses hot melt adhesive powder that is cured on the film, then bonded to the fabric by a heat press. The adhesive needs a surface it can hold. That is why we list the fabrics that work and name the one kind that does not.
How do you order DTF transfers from us?
Open the gang sheet builder, upload your art, and place your designs on a sheet that is 22 inches wide. Pick the length you need, from 1 foot to 20 feet. Here is the price for each length at $6.00 per foot.
| Sheet length | Price |
|---|---|
| 1 foot | $6 |
| 2 feet | $12 |
| 3 feet | $18 |
| 5 feet | $30 |
| 10 feet | $60 |
| 15 feet | $90 |
| 20 feet | $120 |
Quantity 2 of the 20 foot sheet gives you 40 feet. The builder shows the print DPI when you upload, so you can keep it at 300 DPI or more. We review every file before printing.
Common questions
Can I use DTF on 100 percent polyester?
Polyester is on our DTF fabric list. Test a spare piece first, as with any new garment.
Does DTF work on nylon?
Yes, nylon is on our fabric list.
Does DTF work on leather and denim?
Yes, both are on our list.
What fabric does not work?
Waterproof or silicone coated materials do not bond well.
Is there a minimum order?
No. There is no minimum on DTF transfers or gang sheets.
Sources: Epson, DTG and DTF printers for small businesses, Brother, printing on polyester, Sawgrass, sublimation printing glossary
